Twin Screw

Premium quality Parallel Twin Screws which uxed in rigid pvc pipe extruders etc. Our parallel twin screws can be modified on the basis of diameter, length-diameter ratio as well as on the type of material to lend optimum performance. We ensure that the screws are coated and have bimetallic lined barrels for maximum wear protection

Front Barrel

Our company is providing Twin Hole Barrel with desired accuracy without any taper. The Single-Hole Barrel offered by us is manufactured up to diameter 250 mm X 4000 mm length using honing process with proper tolerances and accuracy. Barrel is also dually Toughened, Tempered and Gas Nitriding or Plasma Nitriding.

We manufacture Twin Hole Barrels from internal Diameter 52 mm to Diameter 120 mm & maximum 1600 mm length. Special Bimetallic sleeve also can be provided in partial length of barrels as per customer's requirements. We also provide the HSS M2 Sleeve fitted front barrel which is joint with the mother barrel and make one pair. It is also generally known as Front barrel. This front barrel is increasing the life of the barrel.

Honed Tube

We are able to comprehend the specific requirements of our clients and thereby we provide customized solutions to them at highly competitive prices. Our range of products & services include Hard Chrome Plated Rods, Hard Chrome Plated Rams, Honing Job Work, Polishing Job Work, Honed Tubes, Hydraulic Rams, Grinding Services, Polishing Services, Hard Chrome Plating Services, Machining Services & Honing Services.

Our existence in the industry for over two decades is the feature that we capitalize on. We manufacture and do job works of small engineering parts in bulk owing to our infrastructural unit that is capacitated for loading and un-loading up to five tone level.

Single Hole Barrel

We offer highly precision, grinded and super polished single hole barrel for injection molding machine. Barrels are dully toughed, stress released and gas nitriding Or plasma Nirtriding. We make the barrels as per our customers requirement.

We offers the best quality of single hole barrels for plastic processing machinery like extrusion plants, injection molding machine and blow molding machine.We can manufacturer the single hole barrel up to 250 mm outer diameter X 4500 mm length and in hole up to 18 mm to 180 mm inside hole. All barrels are dully toughened, stress released, Gas nitriding or Plasma Nitriding and super honing and hole polished.Barrels achieve the perfect diameter tolerances and clarity for the best results.

Moulding Screw

We manufacture the Injection Moulding screws as per our clients machine standard and design. We give a proven design to deliver the highest through put and superior melt quality. In Injection molding screw we also introduce the Barrier design is especially effective with polyolefin and styrene based resins. Injection Moulding Machine Screw provides mixing quality 3-5 times better than a single stage design.

Single Hole Barrel

Front barrel is generally used in twins screw and barrel which is generally used for rigid PVC pipe. Though in this plants the raw material is rigid PVC it caused wear and tear in screw and barrel both. At the front end of barrel and screw this wear take place at the maximum limit. To give a better service life it is revolutionary idea to fit a front barrel a twin barrel at front end. Front barrel is specially fitted sleeve of HSS M2 grade material which gives the best service life then other nitride materials.

Groove Feed Sleeve

Groove Feed Sleeve is generally used in groove feed geometry screw and barell set to give high output and best melting and mixing quality of final products. Groove Feed Sleeve is made out of different nitride steels like EN 41B, WPS and High Speed Steel materials. The Groove Feed Sleeve can be availed from us at the most competitive prices.

Groove Feed Sleeve Housing

Groove Feed Sleeve Housing is a part in which the groove feed sleeve is inserted. We provide different designs of Groove Feed Sleeve Housing and with double water cooling arrangement. These Groove Feed Sleeve Housings are known for the superb quality and unsurpassed performance.

Twin Barrel

Front barrel is generally used in twins screw and barrel which is generally used for rigid PVC pipe. Though in this plants the raw material is rigid PVC it caused wear and tear in screw and barrel both. At the front end of barrel and screw this wear take place at the maximum limit. To give a better service life it is revolutionary idea to fit a front barrel a twin barrel at front end. Front barrel is specially fitted sleeve of HSS M2 grade material which gives the best service life then other nitride materials.

Single Screw for Woven Sacks

Specially designed for woven sacks industry for processing hd, hdpe & pp material. Barrier design in groove feed geometry and plain geometry. Gives higher output and the best final product strength and quality.

Single Screw & Barrels

We manufacture a wide range of Single Screw and Barrel for Extrusion Plants (Mono-layer Blown Film Plant, Multilayer Blown Film Plant, HDPE Pipe, Woven sack/Raffia Tape Plant, Mono-filament Yarn, Plastic Sutli, Suction Hose Pipe, PVC Pipes, Injection Molding Machine (PP Caps and all Plastic Molded Items) and Blow Molding Machine.

Screw dimensions vary from diameter 18 mm to diameter 125 mm with 1:16 to 1:40 l/d and are made from tested nitride steel. It includes Toughening, Stress Relieving, Gas Nitriding or Plasma (Iron) Nitriding. We provide a special Hard Face Metal Coating in single screw feed zone section to increase the life of Single Screw. We also provide special surface treatment such as Hard Chrome Plating in special purpose screw or requirement of basic polymer.